MACHINERY POOL
In response to a varied market demand, O.M.F. utilises a wide range of
machinery which enables the insourcing of various
production phases for large and small details.
HORIZONTAL MACHINING CENTERS C.N.C.
NO. 1 METRO LINEA-N
equipped with:
– supervision management of pallets/tools;
– 9 pallets 600×800 mm;
– compound table index 360 positions;
– strokes: x 1160 y 1000 z 910;
– tools ISO 50: no. 357
NO. 1 LINEA METRO
equipped with:
– 14 pallets 600×800 mm.;
– tools ISO 50: no. 168.
– strokes: x 1150 y 850 z 910;
– compound table index x 1;
NO. 1 LINEA FORMULA 7P
equipped with:
– no 7 pallets 600×500 mm;
– strokes: x 930 y 750 z 920;
– continuous compound table;
– tools ISO 50: no. 183;
– spindle RPM 7000
NO. 1 DAEWOO ACE HM800
equipped with:
– compound table index 360 positions;
– no 2 pallets 800×800;
– strokes: x 1100 y 1000 z 1000;
– tools ISO 50: no. 90.
NO. 1 METRO NG
equipped with:
– 2 pallets 630 x 800 mm.;
– continuous compound table;
– strokes: x 1150 y 900 z 910;
– tools ISO 50: no. 183
NO. 1 DOOSAN NHP 6300
equipped with:
– no. 2 pallets 630×630 mm.;
– continued compound table;
– strokes: x 1050 y 900 z 1000;
– tools ISO 50: no. 60;
– spindle RPM 10000.
NO. 1 KIWA KH-4500
equipped with:
– no. 6 pallets 500×500 mm.;
– continuous compound table;
– strokes: x 700 y 740 z 680;
– tools ISO 40: no. 120;
– spindle RPM 15000.
NO. 1 LATHE CNC
DOOSAN PUMA LM3100:
equipped with:
– diam. 600 1 = 1280.
– tailstock
– front and side motorised tools
VERTICAL MACHINING CENTERS C.N.C.
NO. 1 AWEA BM 1400
VERTICAL MACHINING CENTER
– strokes x 1400 y 800 z 700
– tools ISO 50: no. 30
– compound continuous rotary table COMAND with support
OTHER AUXILIARY SERVICE UNITS:
– NO. 1 DECKEL LATHE:
– featured on 3 axels
– motorised ram with transverse rack feed
– hand operated reduction sleeve
– reclining headstock
– vertical spindle fixing ISO 40
– horizontal spindle fixing ISO 40.
– NO. 1 RADIAL DRILL CASER F40 CM 5: – range 1200 – centralised table clamping.
– NO. 1 HOLE SURFACE GRINDER: rotary table diam. 400 with magnetic chuck.
– NO. 1 WELDER MACHINE: welding cable 600A with rotary positioner.
– NO. 1 ENDLESS SAW: – automatic diam. 250.
PARALLEL LATHE: – diam. 500×1500.
RADIAL PILLAR DRILL: – 10 fusees cm. 1.
TANGENTIAL GRINDING: – 600×250 with magnetic chuck.
RINSING TANK: – double tank for rinsing and pickling.
HYDRAULIC TESTING: – up to 140 litres and 300 BAR.